Tile interface agent how to use tile interface agent use methods and precautions

The tile interface agent is a new type of adhesive material that we can see in many construction areas. Today, the interface agent is one of the indispensable supporting materials for modern home decoration construction and its importance is worth our attention. Due to the many advantages in one, suitable for ceramic tile, glass mosaic, polished tiles, vitrified tiles, marble, terrazzo, brush stone, concrete, cement, mortar and other surfaces. Then, what is the tile interface agent ? How to choose and use the tile interface agent? What are the precautions for using the tile interface agent? Don't worry, let me explain it to you.

What is tile interface agent

The interface agent, which is a type of adhesive, is used for the appearance of concrete. Since the appearance of the bottom layer of the wall is too smooth, it will fall off when the tile is attached. Using this, the surface of the bottom surface of the wall can be roughened, its adhesion can be added, and the plastering can be prevented. Layers bulging shells.

Tile interface agent, with permeability, water resistance, air permeability and weathering function, can form a mesh system at the bottom layer to solve the problem of empty drums and falling between faults. Suitable for the bottom layer treatment of concrete, small blocks, brick and concrete walls, tile bonding, brick back coating and thermal insulation plates.

Tile interface agent characteristics

1. Two-way infiltration bonding.

2. Highly soft, good breathability, water resistance, non-toxic and tasteless, green products.

3. Acid and alkali resistance, strong weather resistance.

4. The construction is simple and fast.

Tile interface agent purchase points

There are many kinds of interface agents. Although they can be used on various concrete surfaces, they must be used more prominently. Different base surfaces have different options. First of all, to understand what is the basis, what is the construction method, only then choose what material. On the market, the interface agent has different models according to different applicability, and when selected, the store can be informed about the situation and targeted purchases.

Tile interface agent price how

At present, there are many tile interface agent brands, such as: Lebang, Yonggu, Huaqian, Shuanghong, etc. Each brand has its own characteristics, some environmental protection, some good adhesion, of course, different quality and different prices, The general price is in the tens or hundreds of yuan / barrel or so, the purchase is not just to see the brand, the price, should choose the most suitable.

Note: This price is for reference only! Due to different geographical areas, prices will vary. For more details on the prices, please refer to the local distributors!

Tile interface agent usage method

1, the preparation of the wall base

First base cleanup. Remove the oily and loose layers from the base layer to ensure that the walls are clean and dust-free. If the wall is loose or cracked, it should be repaired in advance; if the wall material is highly absorbent, it can be wetted with water first.

2, configure the stirring interface agent

According to the product description, the interface agent is formulated. Dry powder type blending ratio "powder: water = 2:1". The emulsion type configuration ratio "Liquid: Cement: Sand = 1:1:1", the cement requirement is 42.5 or more ordinary silicate or slag cement. The interface agent is best stirred with electric equipment, which can be evenly mixed.

3, brushing and drying

Use a roller or brush to apply the interface agent to the base surface. Do not miss the brush. After the water is volatilized, the surface is sticky, and the slurry is collected, and near the initial coagulation, subsequent construction can be performed.

4, maintenance and product protection

After the construction, ensure the indoor ventilation, until the slurry is dry, and confirm the closed base surface before the next step.

Tile interface agent use matters needing attention

1. Interface agent construction environment requirements

The construction environment is dry, humidity is less than 70%, and ventilation is good. The base surface and ambient temperature are not lower than 5°C.

2, special circumstances

The surface of the substrate is porous brick, or the construction temperature is greater than 35°C. The interface agent can be applied twice to improve the adhesion.

3, according to the amount of deployment

The interface agent preparation should not be much, and it should be used up within one hour after mixing; the interface agent should be stored above 5°C to prevent sunlight.

4, do not forget to clean construction tools

The solidified interface agent is difficult to remove. After the tool is used, it should be cleaned as soon as possible.

5. Inadvertently clean up in time

Interface agent does not contain harmful substances, no radiation, construction should avoid inhalation of dust, accidentally eye, should be washed immediately and consult a doctor.

Editor's summary: The above is a description of how to use tile interface agent with ceramic tile interface agent and related knowledge of precautions. Hope to help friends with this requirement! For more information, please continue to pay attention to our website. Follow-up will present more exciting content. You can also purchase your favorite product on Qijia Mall!

Tile interface agent

HEBEI HANMAC MACHINE CO., LTD can provide  Aluminum Flange  with high quality and best price! Now we can offered Aluminum Welding Neck Flange, Aluminum Blind Flange, Aluminum Slip On Flange, and  Aluminum Plate Flange  The Aluminum Forged Plate Flange is related to aluminum welding neck flange. If the customers want to some special aluminum forged plate flange, we can offer as the customers' drawing.

We can offer high quality aluminum flanges.

Our production scope: ASTM/ASME/ANSIB16.5, B16.47, ASME/ANSIB16.48 flange Slip On Flange , Weld Neck Flange Threaded Flange Blind Flange

Size: 1/2"-120" (DN15-DN3000)

Pressure: Class150-Class2500

Facing RF/FF / RTJ

Standard: ASTM/ASME/ANSIB16.5, ASME/ANSI B16.3and B16.47, ASME/ANSIB16.42, JIS/KS (5K, 10K, 16K, 20K), DIN2633, DIN2634, DIN2635,EN1092,BS4504, Customized drawings

Inspection: In house and third party

Document: MTC Comply with EN10204 3.1 can be provided prior to shipment

Aluminum Flange Jpg Webp

Aluminum Plate Flange

Aluminum Forged Plate Flange, Aluminum 1060 Plate Flange, Aluminum 5083 Plate Flange,Aluminum 6061 Plate Flange

HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com